Source: National Energy Administration

Promote the optimization and adjustment of the power supply structure.
Accelerate the development of a green, low-carbon power supply structure.
Accelerating the green and low‑carbon transformation of the power‑supply structure is a crucial pillar for the whole society to achieve carbon peaking and carbon neutrality on schedule, and it also constitutes a solid step in implementing the new energy‑security strategy of “Four Revolutions and One Cooperation.” Recently, the National Development and Reform Commission and the National Energy Administration released the “15th Five-Year Plan for Building a New‑Type Power System” (hereinafter referred to as the “Plan”), which identifies “expediting the establishment of a green and low‑carbon power‑supply framework” as one of the core tasks in constructing the new‑type power system, and lays out a series of key initiatives to advance the optimization and adjustment of the power‑supply mix. The 15th Five-Year Plan period represents a critical phase—both a decisive stage and a period of intensive effort—for China to reach its carbon‑peaking target, and it is also a pivotal period for building a new‑type power system. In response to the new circumstances and requirements, we must adhere to a multi‑energy approach and coordinated transformation, strike an appropriate balance between development and security, and accelerate the formation of a green and low‑carbon power‑supply system.
I. Accurately Grasping the Situation Facing China’s Power-Source Optimization and Adjustment during the 15th Five-Year Plan Period
(1) The “dual carbon” strategy calls for accelerating the transformation of the power supply side.
To implement the “dual carbon” strategy, China has set nationally determined contributions, specifying that by 2030, non‑fossil energy will account for 25% of total energy consumption and by 2035, this share will exceed 30%. Furthermore, China aims to achieve a combined installed capacity of 3.6 billion kilowatts for wind and solar power by 2035, thereby charting a clear course for accelerating the transformation of the energy and power sectors. The 15th Five-Year Plan period will not only be the decisive phase for achieving the first nationally determined contribution target but also a critical window for ensuring the smooth realization of the second. Consequently, advancing a green and low‑carbon transition of the power generation mix will be a key priority for China’s power industry during this period. Accelerating the supply‑side transformation of the power sector requires both sustained expansion of non‑fossil sources—particularly large‑scale, high‑quality development of new energy—and intensified efforts to enhance energy efficiency and reduce carbon emissions from fossil‑fuel‑based power generation.
(II) The challenges of integrating and accommodating large-scale renewable energy into the grid will become increasingly pronounced.
By the end of 2025, China’s cumulative installed capacity of wind and solar power will reach 1.84 billion kilowatts, accounting for nearly 50% of the total. At the same time, the country’s renewable energy utilization rate in 2025 is projected at 94.6%, down 1.7 percentage points from the previous year. The Plan sets a target of achieving high‑level integration of over 2.8 billion kilowatts of renewable energy by 2030. This implies that, during the 15th Five-Year Plan period, the annual addition of new grid‑connected renewable capacity will remain above 200 million kilowatts, further intensifying pressure on renewable energy consumption. Balancing large‑scale renewable expansion with efforts to address the “spatiotemporal mismatch” of renewables and maintain an appropriate level of renewable energy absorption represents a major challenge for China’s power sector during the 15th Five-Year Plan.
(3) Coal-fired power will continue to shoulder the dual responsibilities of providing reliable backup supply and achieving energy conservation and carbon reduction.
By the end of 2025, China’s coal-fired power capacity will stand at approximately 1.26 billion kilowatts, playing a vital role in ensuring reliable electricity supply during peak‑demand periods in summer and winter. At the same time, by 2025, coal-fired power will account for 32% of total installed capacity and 51% of total generation, down 17 and 10 percentage points, respectively, from 2020, thereby creating room for the development of clean energy. During the 15th Five-Year Plan period, the commissioning schedules of long‑cycle, baseload‑supporting sources such as hydropower, nuclear power, and pumped storage remain subject to certain uncertainties, while emerging energy storage technologies have yet to achieve large‑scale replacement of conventional supporting resources. Consequently, coal-fired power must continue to grow at an appropriate pace to serve as a safety net and ensure system reliability. Meanwhile, the energy sector accounts for more than 90% of the nation’s total carbon emissions, with the power industry alone contributing over 40%, primarily from coal-fired generation. To help the country reach peak carbon emissions, energy‑efficiency and decarbonization upgrades will be elevated to priority tasks in the development of coal‑fired power during the 15th Five-Year Plan period.
II. Continuously consolidate the power supply structure with non-fossil fuel-based generation as the mainstay.
(1) Promote non-fossil fuel power sources to become the dual mainstays of both electricity supply and power generation.
By the end of 2025, China’s installed capacity for non‑fossil‑fuel power generation will exceed 2.3 billion kilowatts, accounting for 61.7% of total installed capacity and 42.3% of total electricity generation, thereby laying a solid foundation for the continued optimization and adjustment of the country’s power supply side during the 15th Five-Year Plan period. The Plan sets a target of achieving preliminary establishment of a new‑type power system by 2030, specifying that by then conventional hydropower capacity will reach approximately 410 million kilowatts; nuclear power capacity will be around 110 million kilowatts; more than 2.8 billion kilowatts of new energy will be integrated at a high level; installed capacity for biomass, concentrating solar power, geothermal, and ocean energy will total roughly 65 million kilowatts; and pumped‑storage hydropower capacity will reach approximately 160 million kilowatts. These milestones are expected to raise the share of non‑fossil‑fuel power generation in national installed capacity to 65% and in total electricity generation to 50% by 2030, signaling that non‑fossil fuels will assume a dominant position in both the structure of installed capacity and electricity generation, becoming the dual mainstay of power supply and demand.
(II) Promote the gradual coverage of new electricity demand by newly added clean energy generation.
During the 15th Five-Year Plan period, China’s electricity demand is expected to continue growing steadily. Based on the development targets for various power sources outlined in the Plan, the country’s cumulative新增 clean energy generation over the five-year period is projected to reach approximately 2.5 trillion kWh, meeting roughly 80% of the nation’s additional electricity demand. By carefully managing the pace of construction and commissioning of different types of power sources, by the end of the 15th Five-Year Plan, conditions should be in place to ensure that newly added electricity consumption is largely met by new clean energy capacity, thereby providing strong support for the successful achievement of the national carbon‑peak target.
III. Coordinating Development and Consumption to Promote the Large-Scale, High-Quality Growth of New Energy
(1) Promote the development and integration of new energy across multiple scenarios on a case-by-case basis.
Promoting the development and integration of new energy across multiple scenarios in a differentiated manner is a key measure to align with China’s endowment of renewable resources and the inverse spatial distribution of electricity demand. This approach coordinates two major pathways—inter‑regional transmission and local consumption—balancing the economies of scale in resource‑rich regions with the proximity‑based utilization needs of load centers, thereby fostering synergistic efforts between “power from the west to the east” and “power from the west for western use,” and maximizing both the potential and the quality of new‑energy development. The Plan establishes a multi‑scenario, coordinated system for development and integration: in the “Three North” region, it advances the construction of large‑scale wind and solar power bases on sandy, gobi, and desert lands, integrating inter‑provincial and inter‑regional transmission with local self‑consumption, thus ensuring reliable power supply to the eastern and central regions while enhancing local absorption capacity; in the Southwest, it leverages the superior regulation capabilities of hydropower to pursue integrated development of hydropower, wind, and solar resources; and in coastal areas and the load centers of the central and eastern regions, it strategically deploys offshore wind power and distributed photovoltaics, fully tapping the potential for localized development and consumption. By adopting a dual‑track approach that combines centralized and distributed systems with both transmission and local integration, the Plan effectively ensures the rational absorption and utilization of new energy.
(II) Vigorously foster new business models for local consumption and expand the capacity for on-site utilization of green electricity.
Cultivating new business models for local consumption is a key lever for expanding the capacity to absorb renewable energy and precisely aligning it with market demand for green power. This approach not only helps alleviate pressure on grid connection and transmission but also provides diverse market participants with more flexible channels for accessing green electricity, thereby fully unleashing the market dynamism of local consumption. The Plan broadens the scope of local‑use scenarios across multiple dimensions, advocating the proactive development of emerging models such as direct green‑power supply and smart microgrids, while supporting regions with substantial industrial loads and favorable renewable‑energy resources in building zero‑carbon industrial parks. It seeks to enhance the self‑balancing and self‑regulating capabilities of these new models and strengthen coordinated planning between them and the broader power grid.
(3) Strengthen guidance on the development and integration of new energy, and implement tiered, region-specific utilization‑rate management.
Implementing region‑specific, tiered target guidelines for renewable energy utilization is a key measure to enhance the precision of renewable energy integration management. It fully accounts for differences across regions in resource endowments, stages of development, and absorption capacities, thereby optimizing the guidance provided by these targets. This approach both safeguards the baseline for efficient renewable energy use and leaves adequate room for development in areas rich in renewable resources, ensuring that deployment plans dynamically align with local absorption capacities. Grounded in regional realities, the Plan—taking into account the penetration rate of renewable electricity as well as factors such as resource availability, grid infrastructure, system flexibility, and load growth—innovatively proposes setting region‑specific, tiered targets for renewable energy utilization. Accordingly, the country is divided into three tiers: regions with utilization rates no lower than 95%, no lower than 90%, and no lower than 85%. At the same time, the Plan sets a national target of maintaining overall renewable energy utilization at around 90% to support the goal of increasing the share of non‑fossil fuel consumption.
(4) Improve the management mechanism for accommodating new energy and establish a full‑cycle evaluation and management system.
Promoting the high-quality development of new energy entails comprehensive, end-to-end efforts spanning the entire lifecycle—from development to commissioning and operation. This requires both optimizing spatial planning and enhancing system flexibility, as well as strengthening assessment and management across all stages of development and integration. Strengthening institutional safeguards can facilitate coordinated guidance throughout the entire new‑energy value chain, improve the systematic, refined, and forward‑looking nature of integration management, and shift governance from reactive response to proactive strategic planning, thereby better aligning with the new landscape of large‑scale, diversified new‑energy development. The Plan seeks to refine mechanisms for integrating new energy across the full process: first, by adhering to medium- and long-term, region‑specific, tiered target setting and dynamically optimizing annual utilization‑rate targets; second, by guiding localities in planning and implementing supporting grid infrastructure and ancillary capacity; third, by transitioning integration assessments from a single utilization‑rate metric to a comprehensive evaluation framework; and fourth, by establishing a full‑cycle monitoring and early‑warning system covering “planning–construction–grid connection–integration.”
IV. Coordinating efforts across multiple fronts to forge a new pattern of diversified development for non‑fossil energy sources.
(1) Scientifically advance hydropower development in key river basins and strengthen their role as a supporting and regulating resource.
Conventional hydropower is a mature, cost‑effective, and highly flexible clean power source with strong peak‑shaving capabilities. It serves as a “stabilizer,” smoothing out the volatility of new energy sources and ensuring system stability. The Plan emphasizes both development and capacity enhancement: on the one hand, it promotes the construction and commissioning of hydropower projects in key river basins such as the upper Jinsha River, the upper Lancang River, the middle Yalong River, and the Dadu River, while advancing major projects like the lower Yarlung Tsangpo River hydropower scheme in a safe and orderly manner; on the other hand, it seeks to fully leverage hydropower’s role in providing support and regulation, setting out priority tasks to strengthen its capacity for peak‑load coverage, ancillary services, and grid stability.
(II) Actively, safely, and orderly develop nuclear power to enhance the capacity for low-carbon baseload electricity supply.
Nuclear power is a clean, low‑carbon baseload energy source with stable output, unaffected by weather conditions and capable of providing reliable, round‑the‑clock electricity. Against the backdrop of large‑scale renewable energy development, nuclear power can assume the role of baseload generation, making it strategically vital for ensuring a long‑term, stable electricity supply. The Plan prioritizes safety and advances nuclear power development in a prudent, step‑by‑step manner: it scientifically defines the layout and construction sequence of coastal nuclear power bases to promote large‑scale deployment, while also emphasizing the development and application of nuclear technologies. It calls for actively advancing research, demonstration, and widespread adoption of next‑generation nuclear technologies, implementing multiple measures to reduce the costs of small modular reactors, and strengthening the integrated utilization of nuclear energy and innovation in business models.
(3) Develop various forms of clean energy tailored to local conditions, and diversify the supply of non-fossil energy sources.
China’s vast territory boasts a diverse array of clean energy sources—solar‑thermal, biomass, geothermal, and ocean energy—each with unique characteristics that can complement one another in specific regions and applications. Solar‑thermal systems, with their inherent heat‑storage capability and stable power output, can help balance the grid at renewable‑energy hubs; biomass energy is well suited to county‑ and rural‑level settings; while geothermal and ocean energy can leverage local resources to deliver differentiated supply options. The Plan, grounded in the resource endowments of each region, encourages diversified development of these distinctive energy sources: it promotes the large‑scale deployment of solar‑thermal power, supports regionally tailored biomass and geothermal power generation, and advances the scaled utilization of ocean energy.
V. Accelerate transformation and upgrading, and comprehensively promote the structural optimization of coal-fired power units as well as energy-saving and carbon-reduction upgrades.
(1) Optimize the structure of coal-fired power capacity by phasing out outdated units and replacing them with advanced ones.
China’s coal-fired power sector boasts a substantial installed capacity, yet unit parameters and efficiency levels vary considerably. Currently, units of 300,000 kW or less still account for more than 40% of the total; these units were generally built early, feature high coal consumption per unit of electricity generated, and exhibit high carbon intensity, with some already approaching the end of their service life. Optimizing the mix of installed capacity, phasing out outdated capacity in an orderly manner, and replacing it with high‑efficiency, state‑of‑the‑art units are direct measures to enhance overall industry efficiency and reduce carbon intensity. The Plan explicitly calls for continuously refining the structure of coal‑fired capacity, steadily and prudently implementing the retirement of coal‑fired units, and encouraging the repurposing of decommissioned plant sites and existing facilities for the deployment of new‑type energy storage systems, phase‑shifting devices, and other upgrades. In addition, the Plan sets a target to increase the share of clean, high‑efficiency coal‑fired units of 600,000 kW and above by at least 10 percentage points by 2030.
(II) Implement intergenerational upgrades and wide-load modifications to fully unlock the energy-saving and carbon-reduction potential of existing generating units.
At present, deep peak‑shaving of coal‑fired power units has become the norm. Prolonged operation at low loads, far from the design‑optimized efficiency conditions, is the primary driver of fluctuations in average coal consumption for coal‑fired power plants. By pursuing wide‑load energy‑efficiency upgrades and cross‑generation parameter retrofits—leveraging existing capacity without requiring substantial new installations—it is possible to reduce carbon intensity, with fuel‑saving benefits that offset most capital expenditures, underpinned by strong economic viability and a solid implementation foundation. The Plan sets out measures to advance wide‑load, high‑efficiency retrofits of existing coal‑fired units, aiming to limit the increase in coal consumption at low‑load operating conditions to no more than 25%. In addition, it calls for regionally tailored full‑load denitrification upgrades for coal‑fired units and the implementation of a number of key cross‑generation retrofit projects, including those targeting 600‑MW‑class units.
(3) Promote the integrated operation of coal-fired power and new energy, and explore new models and pathways for their synergistic development.
Promoting the integrated development of coal-fired power and new energy is an efficient, coordinated approach to balancing the low‑carbon transformation of coal power with the high‑quality integration of renewable energy, and it also represents a key direction for the next‑generation upgrading and transformation of coal power. This model can leverage existing assets—such as transmission channels and grid‑regulation capabilities—to enable low‑cost, local integration of new energy, thereby reducing carbon emissions from coal power while simultaneously expanding capacity for renewable energy absorption, delivering dual benefits of decarbonization and enhanced renewable‑energy integration. The Plan calls for the formulation of policies to support the integrated development of coal power and new energy, prioritizing the implementation of pilot projects in suitable regions, upgrading the regulation capacity of coal‑fired units, advancing system‑level coupling and integration between coal power and renewables, achieving unified control and coordinated dispatch, and ultimately reducing coal‑fired electricity generation.
(4) Accelerate demonstrations of zero-carbon fuels and CCUS, and develop a portfolio of technological solutions for the deep decarbonization of coal-fired power generation.
Conventional decarbonization pathways, such as structural optimization and energy‑efficiency upgrades, are highly feasible, yet their emission‑reduction potential is limited. Achieving deep, long‑term decarbonization of coal‑fired power generation will still require cutting‑edge technologies. Co‑firing zero‑carbon fuels and deploying CCUS are the core strategies for bringing coal‑fired power toward near‑zero emissions; proactively planning and conducting demonstration projects can expand the portfolio of decarbonization technologies and lay the groundwork for a technology‑driven transition in the carbon‑neutral phase. At present, China has already demonstrated operations with 25%–35% ammonia co‑firing, while at the CCUS front, Huaneng’s Zhengning 1.5‑million‑ton‑per‑year project has entered commercial operation, making it the world’s largest coal‑fired power‑plant CCUS facility. The Plan explicitly calls for retrofitting and building, in suitable regions, a number of pilot projects for zero‑ and low‑carbon fuel co‑firing as well as carbon capture, utilization, and storage, thereby exploring clean, low‑carbon pathways for coal‑fired power generation.
As the tasks outlined in the Plan are implemented, China’s power‑generation mix will continue to improve, and a green, low‑carbon electricity supply structure will take shape at an accelerated pace, providing robust support for advancing the development of a new energy system and a new‑type power system.